Home > Cannot Ping > Sonicwall Site To Site Vpn Connected But No Traffic

Sonicwall Site To Site Vpn Connected But No Traffic


I have checked the firewall rules and LAN --> VPN are set to ANY/ANY Allow All and the same for VPN --> LAN. I've been over the VPN config, and the NAT and firewall rules on both sonicwalls. Reply admin says: July 30, 2014 at 9:01 pm Hi, Cam! That is the reason I could connect to my Exchange server when my WLAN on the Slave SonicWall was not bridged. Check This Out

Reply admin says: July 22, 2014 at 8:13 am Kameron: I'm not sure how you are laying out your config but the Sonicwalls ARE the routers! (or should be). Also, with a site-to-site VPN you actually see multiple tunnels show in the VPN listing if you are routing multiple nets on each side of the VPN itself and those multiple Building the VPN this way gives you more flexibility as well as better granular control which *might* solve your problem. On the Network tab you do the same thing as you did the first time around only this time the Remote Network will be the LAN behind the master Sonicwall. https://community.spiceworks.com/topic/411887-sonicwall-vpn-site-to-site-cannot-ping-access-main-office

Sonicwall Site To Site Vpn Connected But No Traffic

The answer is simply to configure a Default Gateway on the computer (or a route of last resort in a LAN router) pointing to the SonicWALL LAN IP address. 5. I did that, and then also went to the remote fortigate and added the 3 subnets as part of it's local LAN. But, for some reason last two days one of my "remote" offices cannot maintain a VPN tunnel to Head Office here in NL, Canada. The problem computer may not have a Default Gateway set at all (common on platforms which don't offer GUI methods for setting gateways like Windows, and when the server historically has

Made setting up our site to site a breeze. This is accompanied by an error in the SonicWALL Log. Reply thebeagle says: April 3, 2015 at 9:29 pm Sean: Are you running DHCP on the remote Sonicwall (the one that initiates the connection)? Sonicwall Vpn Tunnel Up But No Traffic The ASA might not know the route to the Sonicwall from the 192.168.100.X network.

Forgetting Ping for a sec...have you test passing traffic through the tunnel? Sonicwall Global Vpn Client Connected But Cannot Ping Check the boxes next to the items you want to enable (HTTP, HTTPS, SSH) That should take care of the rest of it. Mimsy were the Borograves - why "mimsy" is an adjective? IPS blocking Ping The most common way to test whether traffic is passing through the VPN tunnel is using the ping command.

The Local Network is dis-functional and even though the DSL Internet connection is still active/connected on the Sonicwall WAN Network Interface, Workstation connected to the Remote site Sonicwall Router are not Sonicwall Global Vpn Client Cannot Ping Lan Why is (a % 256) different than (a & 0xFF)? The "easy way" for the VPN build handles all of this inside the VPN policy and you have less granular control over the routing. I plugged the Sonicwall back in, the tunnel came right up, but then from the laptop I couldn't get the internet anymore.

Sonicwall Global Vpn Client Connected But Cannot Ping

If so you may need to switch to a route-based VPN which means the VPN policy simply handles the tunnel and then you have explicit routing rules that handle the various https://support.software.dell.com/kb/sw7565 I know that Sonicwall has a way to handle this when both firewalls are Sonicwall but I'm not sure if this can be done with the Watchguard at the other end. Sonicwall Site To Site Vpn Connected But No Traffic In a site-to-site VPN policy you define everything the VPN is supposed to know about within the policy itself including the networks on each end of the VPN that are exposed Sonicwall Vpn Can Only Ping Gateway I am waiting on their report after reboot.

When I click "add" in the vpn settings, the first option is authentication, not policy type. Glad to be of assistance. The new policy will be displayed on the VPN Policies page. Join the community of 500,000 technology professionals and ask your questions. Sonicwall Site To Site Vpn Routing

How do pilots identify the taxi path to the runway? Browse other questions tagged sonicwall site-to-site-vpn or ask your own question. Figuring I did it wrong, I deleted the address objects and vpn tunnel and started fresh, same thing. But I'll try and help if I can.

Within the VPN, I've pointed the Remote Networks to an Address Group I created which holds two subnets, A 192.168.0.x and B 192.168.100.x. Sonicwall Icmp Test each network using the Find Network Path diagnostic tool. My main site is connected to azure via static VPN and it works fine.

Regards, Robert Reply Juan says: November 25, 2015 at 12:04 am Hello, I was given the task of creating a site to site, after searching and reading forums and articles.

If you're interested in additional methods for monitoring bandwidt… Network Analysis Networking Network Management Paessler Network Operations Advertise Here 779 members asked questions and received personalized solutions in the past 7 Remember, the tunnel is just the encrypted connection between the two Sonicwalls; you can have a tunnel set up just fine but not have traffic flowing across the tunnel due to However, on rare instances these rules don't get automatically created and needs to created manually. Ikev2 Responder: Peer's Local Network Does Not Match Vpn Policy's Destination Network The Sonicwall is creating a separate SA (separate phase2) for each additional subnet that you add to be protected but FortiGate doesn't do that.

the subnet of this office is When I attempt to set this up it tells me it overlaps with the other policy? Reply thebeagle says: November 16, 2015 at 12:41 am Dom: Thank you for the kind comments. You can also enable the DEAD PEER DETECTION if you want. Help Desk » Inventory » Monitor » Community » Home Sonicwall Site to Site VPN connected but can't access remote network by Sirotz on Jan 30, 2014 at 5:32 UTC |

And you need to check the firewall settings on your central site to make sure there are no rules denying traffic from VPN to lan. 0 Poblano OP How do I got them to play ball. Mike Reply thebeagle says: September 17, 2015 at 12:36 am Hi, Mike: OK, if you got the tunnel up AND each side of the tunnel knows about the networks on the When you have a tunnel interface you have to explicitly create routing rules on each endpoint (Sonicwall) to enable traffic to properly route across the tunnel.

Although creating an Address Object for a local network is scarcely required, if a requirement arises to create an Address Object, ensure the zone assignment is LAN or DMZ as the